RefrigeratorsWe fix Maytag fridges and freezers that warm up or stop making ice.
F9E1Slow drain or no drain
What to try
Check the pump filter (front-loaders), the drain hose for kinks or sitting too deep in the standpipe, and suds from non-HE detergent.
When to call
Then the drain pump.
1-Year Parts & Labour Warranty
Diagnostic regularly $129, now $99
Maytag Appliance Repair in Vaughan
Maytag washer, dryer, dishwasher, fridge and oven repair in Vaughan. Diagnostic regularly $129, now $99, and always waived when Aria does the repair.
- Service Area
- Vaughan
- York Region
- Hours
- Mon–Sun 8 AM–10 PM
- Same-Day Service Available
- Diagnostic
- $99 (reg. $129)
- Waived when we do the repair
- Google Rating
- 5.0 out of 5
- On Google
- Coverage
- 1-Year Parts & Labour Warranty
- An industry-high warranty.
- Call or Book
- 1-888-642-0352
- Book Online
Every Maytag in your home, one local team
Maytag built its name on tough laundry machines, and plenty of Vaughan basements still have a Maytag washer and dryer pair doing heavy loads every week. When they break down, it's usually a pump, a lid or door lock, a belt or a sensor, and those are all parts we can replace. Tell us what it's doing, and we'll tell you whether it's worth fixing. If a window today is still open, we can often come today.
We repair Maytag washers, dryers, dishwashers, fridges, freezers, stoves, microwaves and range hoods. Diagnostic regularly $129, now $99, and always waived when Aria does the repair. Every completed repair comes with a 1-Year Parts & Labour Warranty. Call 1-888-642-0352, Mon–Sun 8 AM–10 PM, or book online.
RefrigeratorsWe fix Maytag fridges and freezers that warm up or stop making ice.
Stoves & ovensWe repair Maytag gas and electric stoves that won't heat or light.
WashersWe fix Maytag top-load and front-load washers that won't drain, lock or spin.
DryersWe fix Maytag dryers that won't heat, dry slowly or squeal.
DishwashersWe fix Maytag dishwashers that hold water, leak or leave dishes dirty.
MicrowavesWe repair Maytag over-the-range microwaves that won't heat or start.
Range hoodsWe repair Maytag range hoods with fans, lights or controls that quit.
Maytag Fridge and Freezer Problems We Fix
We repair Maytag top-freezer, bottom-freezer, side-by-side and French-door fridges, plus upright and chest freezers.
Fridge Not Cooling, Freezer Still Cold
- Likely cause
- The evaporator fan or a frosted coil from a defrost fault, so cold air never reaches the fridge side.
- Try this first
- Check that food isn't packed against the vents at the back of the fridge, and the doors close fully.
- When to call Aria
- If the fridge side stays warm, book a visit, and keep the doors closed while you wait for us.
Both Sections Warming Up
- Likely cause
- Dirty condenser coils, a condenser fan, the start components, or less often the compressor.
- Try this first
- Check that the fridge is plugged in, switched on, and the temperature hasn't been turned up by accident.
- When to call Aria
- If both sections keep warming, book a visit. We check the simple things first, and the compressor last.
Ice Maker Not Working
- Likely cause
- A frozen fill tube, an overdue water filter, or a failed inlet valve.
- Try this first
- Check that the ice maker is switched on and the water filter isn't overdue.
- When to call Aria
- If those are fine, the fill tube or inlet valve needs testing.
Upright or Chest Freezer Not Freezing
- Likely cause
- A worn lid or door seal, or on frost-free uprights, a defrost fault.
- Try this first
- Check the lid or door seals all the way around, the freezer isn't overpacked against the vents, and it hasn't been set warmer.
- When to call Aria
- If it still won't freeze, book a visit. A full, closed freezer holds its cold much longer.
Good to know
For side-by-side and French-door models, check that the doors close evenly. A sagging door lets warm air in and makes the fridge run all the time. Keep the doors closed while you wait for us.
Maytag Stove and Oven Problems We Fix
We repair Maytag gas and electric stoves, where most problems come down to one worn part like a bake element, igniter or burner switch.
Oven Not Heating
- Likely cause
- On electric models, a burnt-out bake or broil element. On gas models, a weak igniter that glows but not hot enough to light the burner. Then a sensor or control fault.
- Try this first
- Check the breaker first.
- When to call Aria
- If it still won't heat, we test the element, igniter and sensor before replacing anything.
Gas Burner Clicks but Won't Light
- Likely cause
- Often a wet or misaligned burner cap.
- Try this first
- Once it's cool, dry the cap and seat it flat.
- When to call Aria
- If it still won't light, we test the igniter. If you smell gas, leave it off and call your gas utility first.
Cooktop Element Stuck on High
- Likely cause
- A failed control switch behind the knob.
- Try this first
- If it won't switch off, turn the stove off at the breaker.
- When to call Aria
- Then book a visit. It's a part we replace.
Oven Door Won't Unlock After Self-Clean
- Likely cause
- The door stays locked until the oven has cooled, or the lock motor or switch has failed.
- Try this first
- Let it cool fully.
- When to call Aria
- If it stays locked long after it's cold, the lock motor or switch needs testing.
Good to know
Some Maytag stoves also have a steam-clean option, a short low-heat cycle for light soil.
Maytag Washer Problems We Fix
We repair Maytag top-load and front-load washers, the Maytag machines that work hardest and most often need a visit.
Washer Draining Slowly or Not at All
- Likely cause
- A blocked pump filter, a kinked hose or too many suds.
- Try this first
- Check the drain hose isn't kinked or too deep in the standpipe, use HE detergent, and on front-loaders clean the pump filter.
- When to call Aria
- If those are fine, the drain pump needs testing.
Lid Won't Lock
- Likely cause
- Something in the latch area, detergent or lint build-up, or a worn lid lock.
- Try this first
- Clear and wipe the latch area, close the lid firmly, and unplug the washer for five minutes to reset it.
- When to call Aria
- If it keeps happening, the lid lock is worn.
Washer Won't Spin or Very Loud
- Likely cause
- A worn belt, coupler or drive part on top-loaders, or drum bearings on front-loaders. A loud roar in spin almost always means bearings.
- Try this first
- Spread the load out evenly, check the washer sits level, and run a drain and spin.
- When to call Aria
- If it won't spin on a balanced load, book a visit.
Washer Leaking
- Likely cause
- At the front, usually the seal or dispenser. At the back, usually a fill hose or the pump.
- Try this first
- Check the fill hoses at the back for bulges or loose connections, and use HE detergent at the right amount.
- When to call Aria
- If water keeps appearing, book a visit.
Good to know
Measure HE detergent, don't overload past the top of the agitator or drum, leave front-loader doors open between loads, and check the fill hoses for bulges every few months.
For Maytag washing machine repairs, we test the part before replacing it.
RelatedWasher repair
Maytag Dryer Problems We Fix
We repair Maytag electric and gas dryers, and we can look at a matching washer on the same visit.
Dryer Taking Too Long to Dry
- Likely cause
- A clogged vent causes more slow-drying calls than any part.
- Try this first
- Clean the lint screen, then check the vent hose behind the dryer and the outside flap.
- When to call Aria
- If it's still slow with a clear vent, book a visit.
Dryer Not Heating
- Likely cause
- On gas dryers, an igniter or valve coils. On electric dryers, an element or thermal fuse.
- Try this first
- Check the breaker, and clean the lint screen.
- When to call Aria
- We test the parts, and check the vent too.
Dryer Squealing or Thumping
- Likely cause
- A worn drum roller, idler pulley or belt.
- Try this first
- Check the drum for coins or loose items.
- When to call Aria
- If the noise stays, book a visit.
Loads Damp but the Cycle Ended Early
- Likely cause
- Fabric softener residue can make the dryer think the clothes are already dry.
- Try this first
- Wipe the two metal sensor bars inside the drum with a soft cloth.
- When to call Aria
- If loads stay damp, the sensor or control needs testing.
Good to know
A clogged vent causes more slow-drying calls than any part. Clean the lint screen every load, and keep the vent hose behind the dryer and the outside flap clear.
RelatedDryer taking too long · Dryer repair
Maytag Dishwasher Problems We Fix
We repair Maytag dishwashers that leave water in the tub, wash poorly, come out wet or leak at the door.
Water Left in the Tub
- Likely cause
- A clogged filter, a kinked drain hose or a new disposal's knockout plug.
- Try this first
- Clean the filter under the lower spray arm, check the drain hose under the sink, and make sure a new disposal's knockout plug was removed.
- When to call Aria
- If those are fine, the drain pump or check valve needs testing.
Dishes Coming Out Dirty
- Likely cause
- Clogged spray arm holes, a clogged filter or a weak wash pump.
- Try this first
- Clean the filter first.
- When to call Aria
- If dishes stay dirty with a clean filter, the wash pump needs testing.
Dishes Coming Out Wet
- Likely cause
- Rinse aid that's empty or set too low, a cycle without heated dry, or cool water at the start. Less often, the heating element.
- Try this first
- Fill the rinse aid, choose a heated dry option, and run the hot tap at the sink for 30 to 60 seconds before you start.
- When to call Aria
- If the tub isn't warm after a heated-dry cycle, the heating element or its control needs testing.
Dishwasher Leaking at the Door
- Likely cause
- A worn gasket, the wrong detergent making suds, or overloaded racks so the door doesn't seal.
- Try this first
- Use dishwasher detergent only, and don't overload the racks.
- When to call Aria
- If it still leaks, the door gasket needs replacing.
Good to know
Many Maytag dishwashers use a dual filter system: an upper cylinder filter that twists out and a flat lower filter that lifts out, both rinsed under warm water. How often to clean them depends on how many loads you run and whether you pre-rinse dishes. Keeping them clean prevents many drain codes and gritty dishes. Cloudy glasses are usually hard water or an empty rinse aid dispenser, not a fault.
Maytag dishwashers share their design with the other dishwashers from the same parent company, so the drain pump, wash pump and door gasket are familiar repairs.
RelatedDishwasher repair
Maytag Microwave and Range Hood Problems We Fix
We repair Maytag over-the-range microwaves and Maytag range hoods.
Microwave Not Heating or Not Turning On
- Likely cause
- A door switch or internal fuse is often the cause.
- Try this first
- Check the breaker, then heat a cup of water for one minute to confirm it isn't heating.
- When to call Aria
- Please don't open the housing yourself, since microwaves can hold a charge after unplugging.
Microwave Won't Start With the Door Closed
- Likely cause
- A door switch that isn't confirming the door is shut.
- Try this first
- Open and close the door firmly, and check nothing is caught in it.
- When to call Aria
- If it still won't start, the door switches need testing.
Turntable or Vent Fan Not Running
- Likely cause
- A worn turntable motor or fan motor, or a control fault.
- Try this first
- Lift out the tray and roller, clean them and seat them again.
- When to call Aria
- If the turntable or fan still won't run, book a visit.
Range Hood Fan or Lights Not Working
- Likely cause
- A clogged filter makes the fan loud and weak. Otherwise the motor or a light.
- Try this first
- Clean the grease filters. Most hood filters can go in the dishwasher.
- When to call Aria
- If it's still loud or weak with clean filters, the motor needs testing.
Good to know
On over-the-range microwaves, the vent fan and the charcoal filter (on recirculating setups) need the same attention.
RelatedMicrowave repair · Range hood repair
Maytag Error Codes by Appliance
Codes vary by model, so treat this as a guide for many models, not every one.
Maytag Washer Codes
See washer problemsdrnNot draining or slow to drain
Another drain warning (on many top-load models).
What to try
Same checks: hose, standpipe, suds.
When to call
Then the pump.
F5E2Lid lock can't engage
On many top-load models.
What to try
Clear the latch area and close the lid firmly.
When to call
If it returns, the lock is worn.
Maytag Dryer Codes
See dryer problemsF3E1Exhaust temperature sensor
The sensor that reads the air leaving the dryer has a problem. The dryer may stop heating, stop early, or show the code.
When to call
It's a part we test and replace.
PFPower failure
The dryer lost power during a cycle.
What to try
Press Start to continue.
When to call
If PF keeps appearing without a real power cut, the cord, outlet or a connection needs checking.
Maytag Dishwasher Codes
See dishwasher problemsF9E1Long drain
What to try
Clean the filter under the lower spray arm, check the drain hose under the sink, and if a disposal was just installed, make sure its knockout plug was removed.
When to call
If those are fine, the drain pump or check valve needs testing.
Code still showing after the quick checks? Tell us the code when you book.
Recent Maytag Jobs & Typical Repairs
Real Maytag jobs from our recent calls, plus typical Maytag repairs we see. See more on Our Work.
Typical Maytag repair
Maytag Washer: Not Draining
A blocked pump filter, a kinked drain hose or too many suds cause most slow-drain calls. If those are clear, the drain pump is tested and replaced if it has failed.
Washer repairTypical Maytag repair
Maytag Dryer: Takes Too Long to Dry
A clogged vent causes more slow-drying calls than any part, so the fix often starts with clearing the vent run. If it's still slow with a clear vent, we test the heating parts.
Dryer repairMaytag Repair Pricing
Current offers on diagnostics and installation. You always get the price before work begins.
Diagnostic regularly $129, now $99
$99
Your technician diagnoses your Maytag and gives you the price before any work begins. Diagnostic regularly $129, now $99, and always waived when Aria does the repair.
Installation From $129
From$129
A new Maytag washer, dryer, dishwasher, stove or microwave installed from $129. Pricing depends on the appliance and the existing connections. See installation.
Payment
- Card
- Debit
- Cash
- PayPal
- Apple Pay
* Offers subject to change; price confirmed before work begins.
What Happens at the Visit
Book online or call us. We’ll confirm your appointment, diagnose the problem, and provide the repair price before any work begins.
- Step 01
Book Your Appointment
Call or book online and tell us which appliance needs service and what problem you’re experiencing.
- Step 02
We Diagnose the Problem
A technician inspects the appliance to find the cause of the problem.
- Step 03
You Approve the Repair
We explain the recommended repair and pricing before any work begins.
- Step 04
Repair & Testing
The approved repair is completed and the appliance is tested before we finish.
What to Tell Us When You Book
That helps us bring the right part and finish on the first visit more often.
The code
Exactly as shown, like F9E1 F5E2 drn
The model number
- Top-load washers under the lid or on the back of the console
- Dryers inside the door
- Fridges on the inside wall of the fresh-food section
What you've tried
Like cleaning the filter or checking the vent.
When it happens
At the startMid-cycleAt the end
Repair or Replace Your Maytag?
A simple rule of thumb, then the factors that change it. More on this: repair or replace your appliance.
Repair cost as a share of a comparable new Maytag
Under about halfand the rest in good shape: repair it.
Over about half, or other problems building upIt's a bigger decision. We give you the price so you can weigh it up.
Age & condition
An older appliance with several problems is a different call from a reliable one with a single failure.
Type of failure
Belts, pumps, lid locks, rollers and temperature sensors are affordable parts.
The big-ticket parts
A fridge needing sealed-system work, or a major control failure on an older unit.
The price, first
We give you the price before any work, so you can decide with real numbers.
Maytag laundry machines in particular are often worth fixing. If replacing makes more sense, we also do installation from $129.
What Homeowners Say About Aria
Leave a Google ReviewReal reviews from Vaughan homeowners on Google.
Serving All of Vaughan
We service Maytag appliances in Maple, Woodbridge, Concord, Kleinburg, Thornhill and the rest of Vaughan. If you're outside Vaughan, the answer is usually yes. Call 1-888-642-0352 to confirm.
Service areaVaughanVaughan, Ontario
- Woodbridge
- Maple
- Concord
- Kleinburg
- Thornhill
- Vellore Village
- Sonoma Heights
- Patterson
- Elder Mills
- Vaughan Metropolitan Centre
- Carrville
- Islington Woods
Call 1-888-642-0352Mon–Sun 8 AM–10 PM
Book OnlineMaytag is a trademark of its owner. Aria Appliance Repair is independent and not affiliated with Maytag.
What does F9E1 mean on my Maytag washer?
On many models, F9E1 means the washer is taking too long to drain. Check the drain hose for kinks, make sure it isn't pushed too far into the standpipe, and clean the pump filter if your model has one. Too much detergent can also slow draining, so use HE detergent and measure it. If it continues, the pump may need replacing.
What does F5E2 mean on a Maytag top-load washer?
On many top-load models, F5E2 means the lid lock can't engage. Something may be in the way of the latch, or the lid isn't fully closed. Clear the area around the latch and close the lid firmly, then restart. If the code comes back on its own, the lid lock is likely worn and needs replacing. That's a common, affordable repair.
What does drn mean on my Maytag washer?
On many top-load models, drn is a drain warning: water isn't leaving the tub as it should. The checks are the same as for other drain problems. Look for a kinked hose, make sure the hose isn't too deep in the standpipe, and watch for excess suds from too much detergent. If those are fine, the drain pump needs testing.
Why won't my Maytag washer spin?
Common causes are an unbalanced load, a lid or door lock that won't confirm, or a worn drive part such as a belt or coupler on top-loaders. A loud roar during spin on a front-loader usually points to drum bearings. Try rebalancing the load first. If it still won't spin, we test to find which part it is before replacing anything.
What do F3E1 and PF mean on a Maytag dryer?
On many models, F3E1 points to the exhaust temperature sensor, the part that reads the air leaving the dryer, so the dryer may stop heating or stop early. PF means a power failure interrupted the cycle. Press Start to continue. If PF keeps appearing without a real power cut, the cord, outlet or a connection needs checking.
Why does my Maytag dryer take so long to dry?
A clogged vent causes more slow-drying calls than any part. Clean the lint screen, then check the vent hose behind the dryer for crushing and the outside flap for lint. If airflow is good and clothes are still damp, the problem may be a heating part or a temperature sensor. We check the vent and the dryer together on the same visit.
Can you fix my Maytag washer and dryer on the same visit?
Yes. Many homes have a matching Maytag pair, and they often wear out around the same time. Tell us about both machines when you book, including any codes. We'll check each one and give you a separate price for each repair before any work starts. Diagnostic regularly $129, now $99, and always waived when Aria does the repair.
What does F9E1 mean on a Maytag dishwasher?
On many models, F9E1 on a Maytag dishwasher means a long drain time. Clean the filter under the lower spray arm, check the drain hose under the sink, and if a disposal was just installed, make sure its knockout plug was removed. If those are fine, the drain pump or check valve needs testing by a technician.
Is it worth repairing a Maytag?
Usually. Maytag laundry machines in particular are often worth fixing, because belts, pumps, lid locks, rollers and sensors are affordable parts. A simple rule: if the repair costs less than about half of a comparable new machine and the rest is in good shape, repair it. A fridge needing sealed-system work is where replacing starts to make sense.
How much does Maytag repair cost, and what's the warranty?
Diagnostic regularly $129, now $99, and always waived when Aria does the repair. You get the exact repair price before any work begins. Completed repairs carry our 1-Year Parts & Labour Warranty, covering the part and our work. A new Maytag washer, dryer or dishwasher can be installed from $129.
Do you offer Maytag dishwasher repair near me?
Yes, across Vaughan, including Woodbridge, Maple, Kleinburg, Concord and Thornhill. Common Maytag dishwasher calls are water left in the tub, dishes coming out dirty, and leaks at the door. Before you book, clean the filter under the lower spray arm and check the drain hose under the sink. Outside Vaughan? Call 1-888-642-0352 to confirm your address.
How do I book Maytag repair near me?
Book online by choosing your appliance, a day and an arrival window, or call 1-888-642-0352, Mon–Sun 8 AM–10 PM. We serve all of Vaughan, including Woodbridge, Maple, Kleinburg, Concord and Thornhill. Outside Vaughan? Call to confirm. We accept cards, debit, cash, PayPal and Apple Pay. Have any code ready, like F9E1 or F5E2.
Need Appliance Repair or Installation?
Tell us which appliance you need repaired or installed and we’ll help arrange your appointment.
- Same-Day Service Available
- 1-Year Parts & Labour Warranty
- Mon–Sun 8 AM–10 PM
