Washer leaking, full of water, or refusing to spin? We repair front-load, top-load and stacked washing machines in homes across Vaughan, Concord, Maple, Kleinburg and Woodbridge. You get the cause and the price before any work starts.
Aria Appliance Repair provides in-home washing machine repair throughout Vaughan, Ontario, including front-load and top-load washers and stacked laundry centres. A technician diagnoses the problem on site, explains the cause and the price, and only proceeds once you approve. Completed repairs are backed by a 1-Year Parts & Labour Warranty on Completed Repairs.
From washers that won’t drain or spin to leaks, door locks and error codes, these are some of the most common washing machine problems we diagnose in Vaughan homes.
On front-loaders, the rubber door boot is a common source, often torn or holding a sock.
Other causes are loose or split fill and drain hoses, a leaking pump or a cracked detergent drawer. Too much detergent can also push suds out the door. We find where the water is coming from before replacing anything.
When a washing machine is not draining, start with the drain pump filter.
On most front-loaders it’s behind a small panel at the bottom front, and coins, hair ties and lint collect there. If it’s clear, the cause may be a kinked or clogged drain hose, a failed drain pump, or an object stuck in the pump. For step-by-step checks, see our guide to why your washer isn’t draining or spinning.
A washer won’t start the spin cycle until the water has drained, so a drain problem often looks like a spin problem.
Other causes are an unbalanced load, a worn drive belt, a failed motor coupler, or a lid switch or door lock that isn’t telling the washer it’s closed.
Usually an unbalanced load, a washer that isn’t level, or worn shock absorbers or suspension rods.
A loud grinding or roaring on spin often means worn drum bearings.
Often a door lock, water inlet valve, pressure sensor or control fault.
Write down the code; it helps us bring the right part.
Detergent residue and moisture trapped in the door boot, the dispenser or the pump filter.
Leaving the door open between loads helps. If the boot is torn or the smell stays, have it checked.
From your first call to a washer that runs a full cycle again, here’s what to expect.
Leaking, not draining, not spinning, or an error code. The model number is usually inside the door or lid.
Same-Day Service AvailableDiagnostic regularly $129, now $99, and always waived when Aria does the repair.
Diagnostic regularly $129, now $99Parts and labour, before any work begins.
Before any work beginsWe run a cycle to check that it fills, drains and spins. Completed repairs are backed by our 1-Year Parts & Labour Warranty.
1-Year Parts & Labour WarrantyLooking for washer repair near me in Vaughan? Our office is at 65 Santina St, and we cover the whole city, including Woodbridge, Maple, Concord, Kleinburg and Thornhill. If the washer is leaking, turn off the two water valves behind it and wipe up what you can. If it’s full of water, don’t force the door open on a front-loader. Call us and we’ll walk you through what’s safe to do while you wait.
These use less water and spin faster, so door boots, door locks, drain pump filters and drum bearings get the most wear. Most front-load repairs are done right in your laundry room.
Lid switches, drive belts, motor couplers and suspension rods are the usual parts. We also service stacked laundry centres, where we may need to pull the unit out to reach the back.
We repair top-load and front-load washers, including LG washers, Samsung washers, Whirlpool washers, Maytag washers and Electrolux front-load washers. Don’t see your brand? Call with your model number. Aria is independent and not affiliated with these manufacturers.
Front-load washers
Top-load washers
Stacked laundry centresWe test first and give you the price before any work begins. Diagnostic regularly $129, now $99, and always waived when Aria does the repair.
| Repair | Typical range | |
|---|---|---|
| Lower cost | ||
| Lid switch or door lock | $150–$280 | |
| Water inlet valve | $150–$280 | |
| Drive belt | $150–$250 | |
| Mid range | ||
| Shock absorbers or suspension rods | $160–$300 | |
| Drain pump | $180–$320 | |
| Door boot gasket | $180–$350 | |
| Motor coupler or clutch | $180–$340 | |
| Higher cost | ||
| Control board | $280–$450 | |
| Drive motor | $300–$500 | |
| Drum bearings or tub seal | $450–$700+ | |
* Typical ranges in CAD, before HST. Final price confirmed before work; brand, model and parts affect cost.
Diagnostic regularly $129, now $99, and always waived when Aria does the repair.
Completed washer repairs are backed by our 1-Year Parts & Labour Warranty on Completed Repairs.
If the job needs plumbing, a new drain or water supply valve, wiring work or other work beyond the appliance, we’ll tell you before any work starts.
Pumps, belts, door locks, valves and boots are usually worth repairing. Drum bearings on an older washer are the main case where replacing can make more sense. We’ll give you the price and tell you plainly which way we’d lean.
An older washer with rust, a damaged drum or repeated failures may not justify a major repair.
Pump, door lock, switch, belt, valve and suspension faults are often practical to repair when the washer is otherwise in good condition. Bearings and control boards cost more.
Parts for some older or discontinued models are limited or slow to source.
We compare the repair price with the cost of a comparable new washer and tell you plainly if replacing makes more sense.
If replacing makes more sense, we can install your new washer. Call 1-888-642-0352 to book.
We install front-load, top-load and stacked washers across Vaughan from $129. Final pricing depends on the model and your existing connections. See washer installation for what’s included.
Washer installation starts from $129. Final pricing depends on the washer type, model, installation requirements and existing connections.
What’s included: Positioning, levelling, removing the shipping bolts, connecting the water supply hoses and drain hose to existing compatible connections, and a test fill and drain.
Before installation day: Measure the space and doorways, and check that the water valves, drain and outlet are in working order. Tell us if it’s a stacked or pedestal setup when you book so we can confirm the scope.
Old appliance removal: Ask when you book and we’ll let you know if haul-away is available.
Aria provides in-home washer repair and installation throughout the City of Vaughan, including Woodbridge, Maple, Concord, Kleinburg, Vellore Village, Patterson, Sonoma Heights, Carrville, Vaughan Metropolitan Centre, Elder Mills, Islington Woods & Thornhill. Local details are on our Vaughan appliance repair page.
Call 1-888-642-0352Mon–Sun 8 AM–10 PM
Book OnlineTell us which appliance you need repaired or installed and we’ll help arrange your appointment.
