JennAir repair · Vaughan
1-Year Parts & Labour Warranty
Diagnostic regularly $129, now $99

JennAir Appliance Repair in Vaughan

JennAir fridge, range, wall oven, cooktop, dishwasher and microwave drawer repair in Vaughan. Careful work in finished kitchens. Diagnostic regularly $129, now $99, and always waived when Aria does the repair.

JennAir stainless dishwasher, microwave, range and French-door refrigerator
Service Area
Vaughan
York Region
Hours
Mon–Sun 8 AM–10 PM
Same-Day Service Available
Diagnostic
$99 (reg. $129)
Waived when we do the repair
Google Rating
5.0 out of 5
On Google
Coverage
1-Year Parts & Labour Warranty
An industry-high warranty.
JennAir appliances we repair

Luxury JennAir kitchens, repaired with care

JennAir kitchens in Vaughan are usually built-in and finished around the appliances, so a repair needs a technician who protects floors, panels and cabinetry. JennAir RISE and NOIR appliances share many parts with other Whirlpool-made brands, which often keeps repairs simpler than you'd expect. JennAir ranges, dishwashers and built-in fridges show codes like F3 E1 or an Over Temperature alert. Write it down, because it points us to the right system.

We repair JennAir refrigerators and refrigerator columns, professional-style ranges, wall ovens, cooktops and rangetops, dishwashers, microwave drawers and ventilation hoods. Diagnostic regularly $129, now $99, and always waived when Aria does the repair. You get the price before any work starts, and completed repairs include our 1-Year Parts & Labour Warranty. Call 1-888-642-0352, Mon–Sun 8 AM–10 PM.

Refrigerators

JennAir Refrigerator Repair

We repair JennAir freestanding French-door fridges, including RISE and NOIR models, and JennAir built-in fridges and refrigerator and freezer columns.

Fridge Not Cooling or Over Temperature Alert
Likely cause
A dirty condenser, a stalled fan, frost from a defrost fault, or a door left open. Built-in models show an Over Temperature alert when it gets too warm.
Try this first
Make sure the doors close fully and the vents aren't blocked by food. On built-in models, press the Over Temperature reset and give it a few hours.
When to call Aria
If it's above 4 °C after a day or the alert comes back, book a visit.
Door Alarm Keeps Sounding
Likely cause
A door or drawer that isn't fully closed, a folded gasket, or a failed door switch.
Try this first
Close every door and drawer firmly and check nothing is sticking out. Make sure the gasket isn't folded.
When to call Aria
If the alarm keeps sounding with the doors shut, book a visit.
Ice or Water Dispenser Not Working
Likely cause
A closed water valve, an overdue filter, a frozen fill tube, or a failed inlet valve.
Try this first
Check the ice maker is on, the filter is seated, and the water valve behind the fridge is open. A new install can take a day to make ice.
When to call Aria
If ice or water still won't come, book a visit.
Water or Frost Inside the Fridge
Likely cause
A blocked defrost drain, a door that isn't sealing, or a failed defrost part.
Try this first
Wipe it up, check the gaskets seal evenly, and make sure the fridge or column is level.
When to call Aria
If frost or water keeps coming back, book a visit.

Seeing a code? See JennAir fridge codes

Finger pressing the temperature panel inside a JennAir refrigerator with an over-temperature alert

Good to know

On built-in fridges and columns, we protect the panels and floor when we pull or service the unit.

Most JennAir refrigerator repairs we do on these models land around $150–$850, depending on the part. You get the exact price before any work starts. Sealed-system work (compressor or refrigerant) is quoted separately after diagnosis.

RelatedRefrigerator repair · Fridge not cooling guide · Fridge repair cost

Ranges · Wall Ovens · Cooktops

JennAir Range, Wall Oven and Cooktop Repair

We repair JennAir professional-style gas and dual-fuel ranges, induction ranges, wall ovens, cooktops and rangetops.

Oven Not Heating (F3 E1)
Likely cause
A failed bake or convection element, a gas oven igniter, or an oven temperature sensor fault, which shows as F3 E1.
Try this first
Check the breaker and that no delay or Sabbath setting is on. For F3 E1, turn the breaker off for one minute, then back on.
When to call Aria
If the oven stays cold or F3 E1 returns, book a visit.
Burner Clicks but Won't Light
Likely cause
A wet or dirty burner, a cap that isn't seated, or a failed igniter or spark module.
Try this first
Make sure the burner cap sits flat and the burner is dry. Turn the knob off and try again after a minute.
When to call Aria
If it keeps clicking or won't light, book a visit.
Controls Not Responding (F2 E1)
Likely cause
A control lock, a stuck key (F2 E1), or a failed touch panel or control board.
Try this first
Check the control lock isn't on and the grates aren't pressing on the panel. Then turn the breaker off for one minute.
When to call Aria
If the controls still don't respond or F2 E1 returns, book a visit.
Induction Zone Not Heating
Likely cause
Cookware that isn't induction-ready, a pan that's too small, or a failed induction board.
Try this first
Test with a pan a magnet sticks to, and centre it on the zone.
When to call Aria
If a zone still won't heat with the right pan, book a visit.

Seeing a code? See JennAir stove and oven codes

Oven light on and the cavity cold inside a JennAir wall oven

Good to know

If you smell gas, don't use the range. Leave the house and call your gas utility first.

Most JennAir range and oven repairs we do on these models land around $150–$700, depending on the part. You get the exact price before any work starts.

RelatedStove and oven repair · Oven not heating guide · Oven repair cost

Dishwashers

JennAir Dishwasher Repair

We repair JennAir built-in and fully integrated dishwashers, including panel-ready models.

Not Draining (F9 E1)
Likely cause
A clogged filter, a kinked drain hose, a disposer knockout plug, or a failed drain pump.
Try this first
Rinse the filter, check the drain hose under the sink, and run the disposer. Then turn the power off for 30 seconds.
When to call Aria
If water still sits in the bottom, the drain pump needs testing.
Leaking at the Door or Underneath
Likely cause
Too many suds from dish soap, a worn door gasket, or a loose hose.
Try this first
Use dishwasher detergent only and check the door closes evenly.
When to call Aria
If water keeps appearing, switch it off and book a visit.
Dishes Not Clean or Not Dry
Likely cause
A dirty filter, blocked spray arms, or a failed heater or vent.
Try this first
Clean the filter, check the spray arms spin freely, and keep rinse aid topped up.
When to call Aria
If results stay poor with a clean filter, book a visit.
Won't Start or Controls Dead
Likely cause
The door isn't latched, a control lock is on, or a failed door switch or control.
Try this first
Close the door firmly until it latches and check the control lock. Turn the power off for 30 seconds.
When to call Aria
If it still won't start, book a visit.

Seeing a code? See JennAir dishwasher codes

Hand lifting the filter out of the tub of a JennAir dishwasher

Good to know

Rinsing the filter about once a month prevents most drain and cleaning problems.

Most JennAir dishwasher repairs we do on these models land around $130–$450, depending on the part. You get the exact price before any work starts.

RelatedDishwasher repair · Dishwasher not draining guide

Microwave Drawers · Hoods

JennAir Microwave Drawer and Hood Repair

We repair JennAir built-in microwave drawers and microwave ovens, plus JennAir range hoods and downdraft vents.

Microwave Drawer Runs but Doesn't Heat
Likely cause
A failed high-voltage part, magnetron or door switch.
Try this first
Close the drawer firmly and heat a cup of water for one minute.
When to call Aria
If the water stays cold, stop using it and book a visit. Please don't open the cover.
Drawer Won't Open or Close
Likely cause
Something blocking the drawer, a child lock, or a failed drawer motor or gear.
Try this first
Clear anything blocking the drawer and check the control lock isn't on.
When to call Aria
If the drawer still won't move, book a visit.
Hood Fan Not Working
Likely cause
A failed fan motor, switch or control board.
Try this first
Try every fan speed and clean the grease filters.
When to call Aria
If the fan stays silent, book a visit.
Hood Lights Out
Likely cause
A failed bulb or LED module, or a control fault.
Try this first
Check the light button and the breaker.
When to call Aria
If the lights still won't come on, book a visit.
Microwave drawer half open with a cold bowl of soup inside

Good to know

Microwaves can hold a charge after unplugging, so please don't open the housing yourself. We test them safely.

Most JennAir microwave drawer and hood repairs we do on these models land around $130–$450, depending on the part. You get the exact price before any work starts.

RelatedMicrowave repair · Range hood repair

Error codes

JennAir Error Codes by Appliance

Codes vary by model, so treat this as a guide for many models, not every one.

JennAir Fridge Codes

See fridge problems
Over Temperature

Fridge or freezer got too warm

Built-in models. Fridge above 9 °C or freezer above −9 °C for over 1½ hours.

What to try

Press the Over Temperature reset, keep the doors closed, and check after a few hours.

When to call

If it comes back, book a visit.

Door Alarm

A door has been open too long

Sounds after a few minutes and repeats.

What to try

Close every door and drawer firmly.

When to call

If it sounds with the doors shut, book a visit.

JennAir Range Codes

See range problems
F3 E1

Oven temperature sensor problem

What to try

Turn the breaker off for one minute, then back on.

When to call

If it returns, the sensor or wiring needs testing.

F2 E1

Keypad problem

What to try

Check the grates aren't pressing the panel, then turn the breaker off for one minute.

When to call

If it returns, the keypad or control needs testing.

JennAir Dishwasher Codes

See dishwasher problems
F9 E1

Taking too long to drain

What to try

Rinse the filter, check the drain hose, and run the disposer.

When to call

If it returns, the drain pump needs testing.

Code still showing after the quick checks? Tell us the code when you book.

Jobs & repairs

Typical JennAir Repairs

Typical JennAir repairs we see, and what usually fixes them. See our recent jobs on Our Work.

Typical JennAir repair

Range

JennAir Range: Burner Clicking, Won't Light

Usually a wet or dirty burner, or a failed spark module or igniter. We clean and test before replacing anything.

Stove repair
Typical JennAir repair

Fridge

JennAir Fridge: Over Temperature Alert

Often a dirty condenser, a stalled fan or a defrost fault. We find the cause and protect your panels and floor while we work.

Fridge repair
Typical JennAir repair

Dishwasher

JennAir Dishwasher: F9 E1 Not Draining

Usually a clogged filter, a kinked hose or the drain pump. We clear it and test the pump before replacing it.

Dishwasher repair
JennAir repair pricing

JennAir Repair Pricing

Current offers on diagnostics and installation. You always get the price before work begins.

Diagnostic regularly $129, now $99
$99

Your technician diagnoses your JennAir and gives you the price before any work begins. Diagnostic regularly $129, now $99, and always waived when Aria does the repair.

Installation From $129
From$129

A new JennAir dishwasher, range, wall oven or microwave drawer installed from $129. Pricing depends on the appliance, panels and existing connections. See installation.

Payment
  • Card
  • Debit
  • Cash
  • PayPal
  • Apple Pay

* Offers subject to change; price confirmed before work begins.

Your visit

What Happens at the Visit

Book online or call us. We’ll confirm your appointment, diagnose the problem, and provide the repair price before any work begins.

  1. Step 01

    Book Your Appointment

    Call or book online and tell us which appliance needs service and what problem you’re experiencing.

  2. Step 02

    We Diagnose the Problem

    A technician inspects the appliance to find the cause of the problem.

  3. Step 03

    You Approve the Repair

    We explain the recommended repair and pricing before any work begins.

  4. Step 04

    Repair & Testing

    The approved repair is completed and the appliance is tested before we finish.

Before you book

What to Tell Us When You Book

That helps us bring the right part and finish on the first visit more often.

The code

Exactly as shown, like F3 E1 F9 E1 F2 E1

The model number

  • Fridges on the inside wall of the fresh-food section, or on the ceiling of built-ins
  • Ranges & wall ovens on the oven frame behind the door or drawer
  • Dishwashers on the edge of the door or the tub frame

What you've tried

Like cleaning a filter or power-cycling the unit.

When it happens

At the startMid-cycleAt the end
Repair or replace

Repair or Replace Your JennAir?

A simple rule of thumb, then the factors that change it. More on this: repair or replace your appliance.

Repair cost as a share of a comparable new JennAir
Under about halfand the rest in good shape: repair it.
Over about half, or other problems building upIt's a bigger decision. We give you the price so you can weigh it up.

Age & condition

An older appliance with several problems is a different call from a reliable one with a single failure.

Type of failure

Most JennAir repairs we see are a single part: an igniter, an element, a temperature sensor, a fan, a drain pump or a control.

The big-ticket parts

Sealed-system work on a fridge, or a main control or induction board on a range.

The price, first

We give you the price first, so you can decide with real numbers.

With built-in JennAir appliances, replacing one often means new panels or cabinetry, so repair is usually the better value. If replacing makes more sense, we also do installation from $129.

Reviews

What Homeowners Say About Aria

Leave a Google Review

5.0 ★ on Google

Real reviews from Vaughan homeowners on Google.

  • Google review

    Amazing! Thoroughly, clean, honest. Joe was professional and did an awesome job. I highly recommend him and will call on him again.

    Mary C.
  • Google review

    Had a great experience with Aria Appliance. Their technician Joe showed up on time, was professional, honest and very knowledgeable. He diagnosed the issue quickly and had our Wolf oven fixed the next day. Highly recommend!

    Luecil A.Oven
  • Google review

    the problem was that the oven was not reaching the set temperature and would not go any higher than 320°. I called, and a technician showed up the same day, quickly diagnosed it, and came back the next day with the parts and replaced the bake element. Fast, fair-priced, and friendly. 😊

    Jeff M.Oven
  • Google review

    Great work and honest.Would not hesitate to hire him again

    Nick L.
  • Google review

    Honest, professional, and fairly priced. The repair was done on time with no unnecessary charges. Highly recommend!

    Jay K.
  • Google review

    Aria appliances Technician was very knowledgeable and saved me from buying new dishwasher and save me $$$$ by fixing my Dishwasher quickly and it runs great. Thank you Aria Appliance team

    Monera S.Dishwasher
  • Google review

    Our 2 year old Electrolux washing machine started glitching and would stop and display several error codes during the drain cycle (full of water and wet clothes). I called Electrolux and their technician determined that the drain pump needed to be replaced, but it would have taken about a week for them to receive the part and come back to install it.

    We decided to call Joe at Aria Appliance Repair after a friend recommended him. Joe came out, tested the pump, got the washer to drain and found that the pump was actually working. He spent more time testing the machine and eventually determined that the main control board was the problem. He came back the next day with the new board, installed it, and tested the washer twice to make sure everything was working properly.

    I've since run several loads with no issues. We were really impressed with Joe's knowledge and troubleshooting. He was able to properly diagnose the problem when the manufactures technician had misdiagnosed it. Definitely recommend Joe and Aria Appliance Repair.

    Will G.Washer
Service Area

Where We Work

JennAir repair in every part of Vaughan, including Woodbridge, Thornhill, Maple, Kleinburg and Concord. Not in Vaughan? Yes, we may still be able to help. Call 1-888-642-0352 to confirm. See recent jobs on Our Work.

Aria Appliance Repair branded Ford Transit Connect van
Service areaVaughanVaughan, Ontario

See every area we serve

Call 1-888-642-0352Mon–Sun 8 AM–10 PM

Book Online
What does F3 E1 mean on my JennAir range or wall oven?
On many JennAir ranges and ovens, F3 E1 points to the oven temperature sensor or its wiring. Turn the breaker off for one minute, then back on. If F3 E1 comes back, book a visit.
What does F2 E1 mean on my JennAir range?
F2 E1 points to the keypad or touch controls. Check the grates aren't pressing on the control panel, then turn the breaker off for one minute. If it comes back, the keypad or control needs testing.
What does the Over Temperature alert mean on my JennAir built-in fridge?
It means the fridge got above about 9 °C or the freezer above about −9 °C for more than an hour and a half. Press the Over Temperature reset, keep the doors closed and check after a few hours. If it comes back, book a visit.
What does F9 E1 mean on my JennAir dishwasher?
It means a long drain. Rinse the filter, check the drain hose under the sink isn't kinked, run the disposer, then turn the power off for 30 seconds. If it returns, the drain pump needs testing.
Why won't my JennAir burner light?
Usually the burner is wet or dirty, or the cap isn't seated flat. Let it dry, seat the cap and try again. If it keeps clicking or won't light, an igniter or spark module may have failed.
Do you repair JennAir built-in fridges and columns?
Yes. We repair JennAir built-in fridges and refrigerator and freezer columns, and we protect the panels, cabinetry and floor while we work.
Do you repair JennAir microwave drawers and hoods?
Yes. We repair JennAir microwave drawers, built-in microwave ovens, range hoods and downdraft vents. Please don't open a microwave cover yourself, because it can hold a charge.
Do you repair JennAir RISE and NOIR appliances?
Yes. RISE and NOIR are JennAir's two design styles. They share the same inner workings, and we repair both.
Is it worth repairing a JennAir appliance?
Usually, yes. Most JennAir repairs are a single part, and with built-ins, replacing often means new panels or cabinetry too. A simple rule: if the repair costs less than about half of a comparable new appliance, repair it. We price it first, so you decide.
How much does JennAir repair cost?
Diagnostic regularly $129, now $99, and always waived when Aria does the repair. Most JennAir repairs land in the low hundreds, depending on the part, and sealed-system fridge work is quoted separately. You get the exact price before any work starts. We accept cards, debit, cash, PayPal and Apple Pay, and completed repairs carry our 1-Year Parts & Labour Warranty.
Can you get parts for my JennAir appliance?
Yes. Many JennAir parts are shared with other Whirlpool-made brands, so common parts are usually easy to get. Some design-specific parts take longer. If a part needs ordering, we tell you the timing up front and book a second visit that suits you.
How do I book JennAir repair near me?
Book online by choosing your appliance, a day and an arrival window, or call 1-888-642-0352, Mon–Sun 8 AM–10 PM. We serve all of Vaughan, including Woodbridge, Maple, Kleinburg, Concord and Thornhill. If you're outside Vaughan, call to confirm your address. Write down any code first, because it helps us plan the visit.

Need Appliance Repair or Installation?

Tell us which appliance you need repaired or installed and we’ll help arrange your appointment.

  • Same-Day Service Available
  • 1-Year Parts & Labour Warranty
  • Mon–Sun 8 AM–10 PM