RefrigeratorsWe fix Electrolux French-door fridges that stop cooling or making ice.
SY EFEvaporator fan problem
Often frost around the fan.
What to try
Unplug the fridge for a few minutes and check the doors close fully.
When to call
If it returns, we test the fan and the defrost system.
1-Year Parts & Labour Warranty
Diagnostic regularly $129, now $99
Electrolux Appliance Repair in Vaughan
Repair for Electrolux front-load laundry, induction and dual-fuel ranges, wall ovens and French-door fridges in Vaughan. Diagnostic regularly $129, now $99, and always waived when Aria does the repair.
- Service Area
- Vaughan
- York Region
- Hours
- Mon–Sun 8 AM–10 PM
- Same-Day Service Available
- Diagnostic
- $99 (reg. $129)
- Waived when we do the repair
- Google Rating
- 5.0 out of 5
- On Google
- Coverage
- 1-Year Parts & Labour Warranty
- An industry-high warranty.
- Call or Book
- 1-888-642-0352
- Book Online
Electrolux laundry and kitchen repair, one local team
Electrolux is the premium side of its family. In Vaughan we mostly see it in front-load laundry pairs and stacked laundry towers, induction and dual-fuel ranges, wall ovens and wall oven/microwave combinations. When something goes wrong, these show short codes like E21, F10, SY EF or i20. Write the code down, because it points us to the right system before we arrive.
We repair Electrolux front-load and top-load washers, dryers, French-door and counter-depth fridges, induction, gas and dual-fuel ranges, wall ovens, cooktops, dishwashers, over-the-range, built-in and drawer microwaves, and range hoods. Diagnostic regularly $129, now $99, and always waived when Aria does the repair. You get the price before any work starts, and completed repairs include our 1-Year Parts & Labour Warranty. Call 1-888-642-0352, Mon–Sun 8 AM–10 PM.
RefrigeratorsWe fix Electrolux French-door fridges that stop cooling or making ice.
Ranges & ovensWe repair Electrolux induction, gas and dual-fuel ranges and wall ovens.
WashersWe fix Electrolux front-load washers that won't drain, fill or unlock.
DryersWe fix Electrolux dryers that won't start, stop heating or run long.
DishwashersWe fix Electrolux dishwashers that leave water, leak or don't dry.
MicrowavesWe repair Electrolux over-the-range and drawer microwaves that won't heat.
Range hoodsWe repair Electrolux range hoods with fans, lights or controls that quit.
Electrolux Fridge Problems We Fix
We repair Electrolux French-door and counter-depth fridges, and we check the simple causes before the sealed system.
Ice Maker Not Making Ice
- Likely cause
- A frozen fill tube, a failed water inlet valve, an overdue water filter, or an ice maker that has stopped cycling.
- Try this first
- Check the ice maker is switched on, the water filter is seated and not overdue, and the supply valve behind the fridge is open. Break up any clump in the bin.
- When to call Aria
- If ice still won't come after a day, book a visit.
Fridge Warm, Freezer Still Cold
- Likely cause
- The evaporator fan, or frost on the coil from a defrost fault that blocks cold air to the fridge side.
- Try this first
- Make sure food isn't pressed against the vents and the doors and drawers close fully. A fridge thermometer on a middle shelf tells you the real temperature.
- When to call Aria
- If it's above 4 °C after a day, book a visit.
SY EF or SY CE on the Display
- Likely cause
- On many models, SY EF points to the evaporator fan and SY CE to a communication fault between the boards.
- Try this first
- Turn the fridge off at the breaker or unplug it for a few minutes, then power it back on.
- When to call Aria
- If the code returns, book a visit. Write down the code exactly.
Water Leaking Inside or Under the Fridge
- Likely cause
- A blocked defrost drain or a loose water line to the dispenser or ice maker.
- Try this first
- Wipe it up, check the water filter is fully locked in and the fridge is level.
- When to call Aria
- If water keeps coming back, book a visit.
Good to know
Counter-depth fridges sit tight to the cabinets, so leave the grille at the bottom clear. Blocked airflow there makes the fridge run warm.
Most fridge repairs we do land around $120–$550, depending on the part. You get the exact price before any work starts.
RelatedRefrigerator repair · Fridge not cooling guide · Fridge repair cost
Electrolux Range and Oven Problems We Fix
We repair Electrolux induction, gas and dual-fuel ranges, single and double wall ovens, oven/microwave combinations and cooktops.
Induction Zone Not Heating
- Likely cause
- Cookware that isn't induction-ready, a pan that's too small for the zone, or a failed induction board.
- Try this first
- Hold a fridge magnet to the bottom of the pan. If it doesn't stick firmly, the pan won't work on induction. Centre the pan on the zone and check the control lock isn't on.
- When to call Aria
- If a zone still won't heat with the right pan, book a visit.
Oven Not Heating
- Likely cause
- A failed bake element, a weak gas igniter, or the oven temperature sensor.
- Try this first
- Check the breaker, make sure a delay start isn't set and try Broil to see if the top heats.
- When to call Aria
- If Bake stays cold, book a visit.
F10, F30 or F90 Code
- Likely cause
- On many models, F10 means the oven ran too hot, F30 points to the oven sensor and F90 to the door lock.
- Try this first
- Turn the range off at the breaker for a few minutes, then try again.
- When to call Aria
- If the code comes back, write it down and book a visit. Don't use the oven while F10 shows.
Gas Burner Clicks but Won't Light
- Likely cause
- Usually a wet or misaligned burner cap, or a weak igniter.
- Try this first
- Once the cooktop is cool, dry the burner cap and base and seat the cap flat.
- When to call Aria
- If it still won't light, we test the igniter and spark module. If you smell gas, leave it off and call your gas utility first.
Good to know
On induction, a zone that won't start is often the pan, not the cooktop. Try a magnetic pot first. If a fridge magnet won't stick to the base, the zone can't heat it.
Most range and oven repairs we do land around $130–$350, depending on the part. You get the exact price before any work starts.
RelatedStove and oven repair · Oven not heating guide · Oven repair cost
Electrolux Washer Problems We Fix
We repair Electrolux front-load washers, including stacked laundry towers and pedestal pairs, and Electrolux top-load washers.
Door Won't Lock or Unlock (E41)
- Likely cause
- Something caught in the door, a worn latch, or a failed door lock.
- Try this first
- Check nothing is caught in the door seal and close it firmly. Turn the washer off for one minute and try again.
- When to call Aria
- A worn door lock is a common repair. If E41 returns, book a visit.
Not Draining (E21)
- Likely cause
- A clogged drain pump filter, a kinked drain hose, or a drain pump that has failed.
- Try this first
- Put towels and a shallow tray down, then clean the drain pump filter behind the small door at the bottom front. Check the drain hose isn't kinked.
- When to call Aria
- If E21 keeps coming back, the drain pump needs testing.
Not Filling (E11)
- Likely cause
- Closed taps, kinked fill hoses, clogged inlet screens, or a failed water inlet valve.
- Try this first
- Open both taps all the way and straighten the hoses.
- When to call Aria
- If E11 shows with the taps fully open, book a visit.
Washer Leaking
- Likely cause
- A torn door boot seal, a loose drain pump filter cap, or too much suds.
- Try this first
- Check the filter cap is screwed in tight and use HE detergent, a little less of it.
- When to call Aria
- If water still shows up after a normal load, book a visit. Tell us where the puddle starts.
Good to know
Leave the door open between loads and wipe the door seal dry. It keeps smells and drain codes down.
Most washer repairs we do land around $150–$350, depending on the part. You get the exact price before any work starts.
RelatedWasher repair
Electrolux Dryer Problems We Fix
We repair Electrolux electric and gas dryers, including stacked pairs and steam models.
Dryer Won't Start
- Likely cause
- A blocked lint path or blower, the door switch, a thermal fuse, or the control. On a recent Caledon job, socks were stuck in the lint trap and blower motor.
- Try this first
- Make sure the door is fully shut and the breaker is on. Pull the lint filter out, clean it and check nothing has dropped into the slot below it.
- When to call Aria
- If it still won't start, book a visit. Please don't run it with something stuck in the blower.
Dryer Not Heating
- Likely cause
- On electric dryers, often a heating element or thermal fuse. On gas dryers, an igniter or gas valve coils.
- Try this first
- Check both breakers for an electric dryer, and the gas valve behind a gas dryer.
- When to call Aria
- We test and replace the failed part, and check the vent so it doesn't happen again.
Dryer Taking Too Long
- Likely cause
- Lint in the vent duct, a crushed duct, or an outside flap stuck shut.
- Try this first
- Clean the lint filter, check the duct behind the dryer isn't crushed and the outside flap opens when the dryer runs.
- When to call Aria
- If the vent is clear and loads still take more than one cycle, book a visit.
Squealing or Thumping
- Likely cause
- Worn drum rollers, a worn idler pulley, or a loose belt.
- Try this first
- Check for a coin or zipper caught at the front of the drum.
- When to call Aria
- If the noise stays, stop using it and book a visit.
Good to know
Stacked pairs: please clear space around the laundry closet, since we may need to unstack the dryer.
Most dryer repairs we do land around $130–$320, depending on the part. You get the exact price before any work starts.
RelatedDryer taking too long · Dryer repair
Electrolux Dishwasher Problems We Fix
We repair Electrolux built-in dishwashers, including top-control models.
Dishes Coming Out Wet
- Likely cause
- An empty rinse aid dispenser, plastics that don't hold heat, or a failed heater or vent.
- Try this first
- Top up the rinse aid, use the extra-dry option if your model has it, and open the door a little after the cycle.
- When to call Aria
- If metal and glass dishes come out wet too, book a visit.
Water Left in the Bottom (i20)
- Likely cause
- A clogged filter, a kinked drain hose, a new disposal's knockout plug, or a drain pump that has failed.
- Try this first
- Twist out and rinse the filter, check the drain hose under the sink and run the disposal before you start.
- When to call Aria
- If i20 keeps coming back, the drain pump needs testing.
Leak in the Base (E30)
- Likely cause
- Water has reached the base pan, from a loose fill line, a door gasket or too much suds.
- Try this first
- Use only dishwasher detergent, never dish soap, and check the door closes evenly.
- When to call Aria
- Switch it off and book a check, since the source of the water needs finding.
Dishes Not Getting Clean
- Likely cause
- A dirty filter, blocked spray arms, or cool water at the start.
- Try this first
- Clean the filter monthly, check the spray arms spin, and run the kitchen tap until it's hot before starting.
- When to call Aria
- If dishes still come out gritty, book a visit.
Good to know
Top-control models only run with the door fully latched. If it won't start, close the door firmly before anything else.
Most dishwasher repairs we do land around $130–$340, depending on the part. You get the exact price before any work starts.
Electrolux Microwave and Range Hood Problems We Fix
We repair Electrolux over-the-range, built-in and drawer microwaves, and Electrolux range hoods.
Microwave Runs but Doesn't Heat
- Likely cause
- A failed high-voltage diode, capacitor, magnetron or door switch.
- Try this first
- Make sure the door or drawer closes fully and heat a cup of water for one minute. If the light and fan work but the water stays cold, stop using it.
- When to call Aria
- Microwaves hold a charge even when unplugged, so please don't open the cover. Book a visit.
Microwave Dead or Won't Start
- Likely cause
- A tripped breaker, a blown internal fuse, or a door switch that has failed.
- Try this first
- Check the breaker and that the door or drawer is fully closed. Check a control lock isn't on.
- When to call Aria
- If it's still dead, a door switch is often the cause, and we test it before replacing anything.
Vent Fan or Light Not Working
- Likely cause
- A failed fan motor, a blown bulb or LED, or the control board.
- Try this first
- Clean the grease filters and try the fan on every speed.
- When to call Aria
- If the fan or light still won't work, book a visit.
Hood Not Clearing Smoke
- Likely cause
- Clogged grease filters, a stuck damper, or an old charcoal filter on a recirculating setup.
- Try this first
- Soak the metal grease filters in hot soapy water, and replace the charcoal filter if your hood recirculates.
- When to call Aria
- If the fan sounds weak with clean filters, book a visit.
Good to know
Microwaves can hold a charge after unplugging, so please don't open the housing yourself. We test them safely.
RelatedMicrowave repair · Range hood repair
Electrolux Error Codes by Appliance
Codes vary by model, so treat this as a guide for many models, not every one.
Electrolux Fridge Codes
See fridge problemsSY CE / SY CFControl boards not communicating
What to try
Unplug the fridge for a few minutes, then plug it back in.
When to call
If it returns, the boards or wiring need testing.
OP / SHTemperature sensor problem
OP means a sensor reads open, SH means shorted.
What to try
Unplug the fridge for a few minutes, then plug it back in.
When to call
If it returns, the sensor needs testing.
H / HIFridge or freezer too warm
Often a door left open.
What to try
Close the doors firmly and give it a few hours.
When to call
If it stays warm, book a visit.
PFPower was interrupted
What to try
Press Alarm Reset and check the food.
When to call
If it keeps showing without a power outage, book a visit.
DI SPIce jammed in the chute
What to try
Open the freezer door and clear the ice from the chute.
When to call
If the chute stays blocked or ices up again, book a visit.
Electrolux Range and Oven Codes
See range and oven problemsF10Oven running too hot
What to try
Turn it off and let it cool. Don't use the oven while F10 shows.
When to call
If it comes back, the sensor or control needs testing.
F1Keypad problem
What to try
Turn the breaker off for 30 seconds, then back on.
When to call
If it returns, the keypad or control needs a technician.
F30 / F31Oven sensor problem
F30 means open, F31 shorted.
What to try
Turn the breaker off for 30 seconds, then back on.
When to call
If it returns, we test the sensor and wiring.
F3 / F20Control boards not communicating
Shown as F26 on some models.
What to try
Turn the breaker off for 30 seconds, then back on.
When to call
If it returns, the boards or wiring need testing.
F90–F94Door lock problem
Often after a self-clean.
What to try
Let the oven cool, then turn the breaker off for 30 seconds.
When to call
If the door won't lock or unlock, book a visit.
Electrolux Washer Codes
See washer problemsE11Taking too long to fill
What to try
Open both taps fully and straighten the fill hoses.
When to call
If the taps are open, the inlet valve may have failed.
E21Taking too long to drain
What to try
Clean the drain pump filter at the bottom front, with towels down first.
When to call
Still E21? The drain pump needs testing.
E41 / E42Door open or lock not recognized
What to try
Close the door firmly, listening for the click, and check nothing is caught.
When to call
A worn door lock is a common repair.
E35Water level too high
What to try
Press Cancel, then Start to resume.
When to call
If it keeps happening, the pressure sensor needs testing.
HO SEHot and cold hoses reversed
Usually right after installation.
What to try
Turn off both taps and swap the hoses to the right inlets.
When to call
If the hoses are on the right inlets and it still shows, book a visit.
SU dSToo many suds
The washer adds extra rinses to clear them.
What to try
Use HE detergent and less of it.
When to call
If suds keep coming back with HE detergent, book a check.
Electrolux Dryer Codes
See dryer problemsEF1Vent blocked
A blocked vent is a fire risk.
What to try
Clean the lint filter, the duct and the outside flap.
When to call
If the vent is clear and EF1 stays, book a visit.
E42Door open
What to try
Check nothing is in the way and close the door fully.
When to call
If the door is closed and E42 stays, the door switch needs testing.
E4Moisture sensor problem
The dryer finishes the cycle and timed cycles still work.
What to try
Use a timed cycle for now.
When to call
If it keeps showing, the sensor needs testing.
H2 / B2Power supply problem
What to try
Check both dryer breakers are on.
When to call
If the breakers are fine, the supply needs checking by your electric utility or an electrician.
H4 / B4Wired incorrectly
Usually right after installation.
When to call
Call your installer to correct the wiring.
Electrolux Dishwasher Codes
See dishwasher problemsi20 / E20Not draining
Shown as i20 or E20 depending on the model.
What to try
Clean the filter, check the drain hose and the disposal knockout plug.
When to call
If it still won't drain, the pump needs testing.
i40 / E40Filter or sump clogged
What to try
Clean the filters and the sump area, then run it again.
When to call
If it keeps coming back, book a visit.
E10Not enough water coming in
What to try
Check the supply valve under the sink is open and the line isn't pinched.
When to call
If it returns, the inlet valve needs testing.
E30Leak or overflow in the base
When to call
Turn off the water to it and book a check.
E50Drain or wash motor problem
What to try
Press Cancel, or turn off the breaker for 5 minutes.
When to call
If it returns, the motor needs testing.
E60Water heating problem
What to try
Press Cancel, or turn off the breaker for 5 minutes.
When to call
If it returns, the heater needs testing.
Electrolux Microwave Codes
See microwave problemsE-04Sensor didn't detect steam
Sensor cooking on over-the-range models. The microwave turns off.
What to try
Wipe the inside dry, cover the food loosely and try again, or cook with a set time.
When to call
If it shows on every sensor cycle, the sensor needs testing.
LockControls are locked
A setting, not a fault. The lock icon is on.
What to try
Follow the child-lock steps in your owner's guide to turn it off.
When to call
If it won't unlock, book a check.
Code still showing after the quick checks? Tell us the code when you book.
Recent Electrolux Jobs & Typical Repairs
A real Electrolux job from our recent calls, plus typical Electrolux repairs we see. See more on Our Work.
Electrolux Dryer: Won't Start
Problem
The dryer had power but wouldn't start when the start button was pressed.
What we did
Socks were stuck in the lint trap and blower motor. We took the dryer apart, removed them and vacuumed out the lint.
Dryer repairTypical Electrolux repair
Electrolux Washer: E21 Not Draining
Usually a clogged drain pump filter or a pump that has stopped. We clean the filter and test the pump, and replace it only if it has failed.
Washer repairTypical Electrolux repair
Electrolux Fridge: Ice Maker Not Working
Often a frozen fill tube or a failed water inlet valve. We test the water supply, the valve and the ice maker, and fix the part that has failed.
Fridge repairElectrolux Repair Pricing
Current offers on diagnostics and installation. You always get the price before work begins.
Diagnostic regularly $129, now $99
$99
Your technician diagnoses your Electrolux and gives you the price before any work begins. Diagnostic regularly $129, now $99, and always waived when Aria does the repair.
Installation From $129
From$129
A new Electrolux washer, dryer, dishwasher, range or microwave installed from $129. Pricing depends on the appliance and the existing connections. See installation.
Payment
- Card
- Debit
- Cash
- PayPal
- Apple Pay
* Offers subject to change; price confirmed before work begins.
What Happens at the Visit
Book online or call us. We’ll confirm your appointment, diagnose the problem, and provide the repair price before any work begins.
- Step 01
Book Your Appointment
Call or book online and tell us which appliance needs service and what problem you’re experiencing.
- Step 02
We Diagnose the Problem
A technician inspects the appliance to find the cause of the problem.
- Step 03
You Approve the Repair
We explain the recommended repair and pricing before any work begins.
- Step 04
Repair & Testing
The approved repair is completed and the appliance is tested before we finish.
What to Tell Us When You Book
That helps us bring the right part and finish on the first visit more often.
The code
Exactly as shown, like E21 F10 i20
The model number
- Washers & dryers usually inside the door frame
- Fridges on the inside wall of the fresh-food section
What you've tried
Like cleaning a filter or power-cycling the unit.
When it happens
At the startMid-cycleAt the end
Repair or Replace Your Electrolux?
A simple rule of thumb, then the factors that change it. More on this: repair or replace your appliance.
Repair cost as a share of a comparable new Electrolux
Under about halfand the rest in good shape: repair it.
Over about half, or other problems building upIt's a bigger decision. We give you the price so you can weigh it up.
Age & condition
An older appliance with several problems is a different call from a reliable one with a single failure.
Type of failure
Most Electrolux repairs we see are a single part: a drain pump, a door lock, a sensor, a fan, an igniter or a heating element.
The big-ticket parts
Compressor or sealed-system work on a fridge, or an induction board or main control board on an older range.
The price, first
Like the Caledon dryer job: it had power but wouldn't start, because socks were stuck in the lint trap and blower motor. Removing them and vacuuming out the lint was the repair.
On Electrolux washers and dryers, pumps, door locks and heating parts are usually worth fixing at almost any age. If replacing makes more sense, we also do installation from $129.
What Homeowners Say About Aria
Leave a Google ReviewReal reviews from Vaughan homeowners on Google.
Where We Work
Electrolux repair in every part of Vaughan, including Woodbridge, Thornhill, Maple, Kleinburg and Concord. Not in Vaughan? Yes, we may still be able to help. Call 1-888-642-0352 to confirm. See recent jobs on Our Work.
Service areaVaughanVaughan, Ontario
- Woodbridge
- Maple
- Concord
- Kleinburg
- Thornhill
- Vellore Village
- Sonoma Heights
- Patterson
- Elder Mills
- Vaughan Metropolitan Centre
- Carrville
- Islington Woods
Call 1-888-642-0352Mon–Sun 8 AM–10 PM
Book OnlineElectrolux is a trademark of its owner. Aria Appliance Repair is independent and not affiliated with Electrolux.
What does E21 mean on my Electrolux washer?
On many models, E21 means the washer is taking too long to drain. Turn it off, put towels and a shallow tray down, and clean the drain pump filter behind the small door at the bottom front. Check the drain hose isn't kinked. If E21 keeps coming back, the drain pump needs testing.
What do E11 and E41 mean on an Electrolux washer?
On many models, E11 means the washer is taking too long to fill, so open both taps fully and check the hoses. E41 means the door is open or not locking, so close it firmly and check nothing is caught. If either code keeps coming back, book a visit.
Why won't my Electrolux dryer start?
Check the door is fully shut, the breaker is on and a control lock isn't set. Clean the lint filter and check nothing has dropped into the slot below it. On a recent Caledon job, an Electrolux dryer had power but wouldn't start because socks were stuck in the lint trap and blower motor. We took it apart, removed them and vacuumed out the lint.
Why is my Electrolux induction range not heating?
Most often the pan isn't induction-ready. Hold a fridge magnet to the bottom of the pan, and if it doesn't stick firmly, the pan won't work. Also centre the pan on the zone and check the control lock. If a zone still won't heat with the right pan, the induction board or control needs testing.
What do F10 and F30 mean on an Electrolux oven?
On many models, F10 means the oven ran too hot and F30 points to the oven temperature sensor. Turn the range off at the breaker for a few minutes and try again, and don't use the oven while F10 shows. If either code comes back, book a visit.
What does SY EF mean on my Electrolux fridge?
On many models, SY EF points to the evaporator fan, often because frost has built up around it. Power the fridge off for a few minutes, then back on, and check the doors close fully. If it returns, we test the fan and the defrost system and fix the cause.
Why is my Electrolux ice maker not working?
Often the water filter is overdue, the supply valve behind the fridge is closed, or the fill tube has frozen. Check the ice maker is switched on and break up any clump in the bin. If ice still won't come after a day, book a visit.
What does i20 mean on an Electrolux dishwasher?
On many models, i20 means the dishwasher didn't drain. Rinse the filter, check the drain hose under the sink, and make sure a new disposal's knockout plug was removed. If i20 keeps coming back, the drain pump needs testing. An E30 code means water has reached the base, so switch it off and book a check.
Is it worth repairing an Electrolux appliance?
Electrolux appliances usually cost more to replace, so most repairs are worth it: a pump, a door lock, a sensor, a fan or a heating part. A simple rule: if the repair costs less than about half of a comparable new appliance, repair it. The bigger calls are sealed-system fridge work or an induction or main control board. We price it first, so you decide.
How much does Electrolux repair cost?
Diagnostic regularly $129, now $99, and always waived when Aria does the repair. After testing, you get the exact repair price before any work starts. Installing a new Electrolux appliance starts from $129. We accept cards, debit, cash, PayPal and Apple Pay, and completed repairs carry our 1-Year Parts & Labour Warranty.
Can you get parts for my Electrolux appliance?
Our technician pins down the exact Electrolux part and gives you the repair price before any work. If a part needs ordering, such as a control board, we tell you the timing up front and book a second visit that suits you. Keep your model number handy. On Electrolux washers, it's usually on a label inside the door frame.
How do I book Electrolux repair near me?
Book online by choosing your appliance, a day and an arrival window, or call 1-888-642-0352, Mon–Sun 8 AM–10 PM. We serve all of Vaughan, including Woodbridge, Maple, Kleinburg, Concord and Thornhill. If you're outside Vaughan, call to confirm your address. Write down any code on the display first, because it helps us plan the visit.
Need Appliance Repair or Installation?
Tell us which appliance you need repaired or installed and we’ll help arrange your appointment.
- Same-Day Service Available
- 1-Year Parts & Labour Warranty
- Mon–Sun 8 AM–10 PM
