DishwashersWe fix Siemens dishwashers that won't drain, clean or start.
F + numberFault code
Shown with beeping on xTronic ranges.
What to try
Press Off to clear the code.
When to call
If the fault code remains, book a visit and tell us the number.
1-Year Parts & Labour Warranty
Diagnostic regularly $129, now $99
Siemens Appliance Repair in Vaughan
We repair Siemens dishwashers, ranges, washers and dryers still in Canadian homes. Not draining, no heat, F codes. Diagnostic regularly $129, now $99, and always waived when Aria does the repair.
- Service Area
- Vaughan
- York Region
- Hours
- Mon–Sun 8 AM–10 PM
- Same-Day Service Available
- Diagnostic
- $99 (reg. $129)
- Waived when we do the repair
- Google Rating
- 5.0 out of 5
- On Google
- Coverage
- 1-Year Parts & Labour Warranty
- An industry-high warranty.
- Call or Book
- 1-888-642-0352
- Book Online
Siemens appliances still going strong
Siemens dishwashers, xTronic ranges and ultraSense washers and dryers were sold in Canada in the 2000s, and many are still running in Vaughan homes. Siemens home appliances aren't sold new here anymore, but these models were built alongside Bosch appliances of the same years, so many repairs are still very doable. We check parts availability first and tell you honestly if a repair makes sense.
We repair Siemens built-in dishwashers, xTronic electric ranges, and ultraSense front-load washers and dryers. Diagnostic regularly $129, now $99, and always waived when Aria does the repair. You get the price before any work starts, and completed repairs include our 1-Year Parts & Labour Warranty. Call 1-888-642-0352, Mon–Sun 8 AM–10 PM.
DishwashersWe fix Siemens dishwashers that won't drain, clean or start.
RangesWe repair Siemens xTronic ranges with ovens that won't heat.
Glass-Top CooktopsWe fix Siemens glass-top cooktops with zones that won't heat.
WashersWe fix Siemens ultraSense washers that won't drain or spin.
DryersWe fix Siemens ultraSense dryers that won't heat.
Siemens Dishwasher Repair
We repair Siemens built-in dishwashers still in Canadian homes, including front-control SL34A models and hidden-control models.
Not Draining
- Likely cause
- A clogged filter at the bottom of the tub, a kinked drain hose, a disposer knockout plug, or a failed drain pump.
- Try this first
- Lift out and rinse the filter, check the drain hose under the sink, and run the disposer before you start.
- When to call Aria
- If water still sits in the bottom, the drain pump needs testing.
Dishes Not Clean or Gritty
- Likely cause
- A dirty filter, blocked spray arms, or a weak wash pump.
- Try this first
- Rinse the filter, check the spray arms spin freely, and use fresh dishwasher detergent.
- When to call Aria
- If dishes stay gritty with a clean filter, book a visit.
Won't Start
- Likely cause
- The door isn't latched, the child lock is on, or a failed door latch or control.
- Try this first
- Close the door firmly until it clicks, check the breaker, and check any lock symbol on the panel.
- When to call Aria
- If it still won't start, book a visit.
Water Under the Dishwasher
- Likely cause
- Suds from dish soap, a loose hose, a worn door gasket, or a leak into the base.
- Try this first
- Use dishwasher detergent only, never dish soap, and check the door closes evenly.
- When to call Aria
- Switch it off and book a check, since the source of the water needs finding.
Good to know
Some older Siemens dishwashers were part of a 2009 Canadian safety recall. If yours is from 1999–2005, we can check the model and serial number for you.
Most dishwasher repairs we do land around $130–$340, depending on the part. You get the exact price before any work starts.
Siemens xTronic Range Repair
We repair Siemens xTronic electric convection ranges still in Canadian homes, with the ceramic glass cooktop, self-clean oven and warming drawer.
F and a Number on the Display
- Likely cause
- The control has logged a fault and is beeping to warn you.
- Try this first
- Press Off to clear the code. If it stays, turn the range off at the breaker for a few minutes.
- When to call Aria
- If the fault code remains, book a visit and tell us the number.
Oven Not Heating
- Likely cause
- A failed bake, broil or convection element, the temperature sensor, or the control.
- Try this first
- Check the breaker and that a timer or delay isn't set. Try Broil to see if the top element heats.
- When to call Aria
- If Bake stays cold, book a visit.
Cooktop Element Not Heating
- Likely cause
- A failed radiant element, its control switch, or the temperature limiter.
- Try this first
- Try the same pot on another element. On a dual element, check you've turned the knob the right way for the size you want.
- When to call Aria
- If an element stays dark, book a visit.
Door Stays Locked After Self-Clean
- Likely cause
- The oven hasn't cooled enough yet, or the door lock has failed.
- Try this first
- Let the oven cool fully. If it's still locked, turn the breaker off for five minutes, then back on.
- When to call Aria
- If it still won't unlock, book a visit.
Good to know
If the ceramic glass is cracked, stop using the cooktop and switch it off at the breaker until we've checked it.
Most stove and oven repairs we do land around $130–$350, depending on the part. You get the exact price before any work starts.
RelatedStove and oven repair · Oven not heating guide · Oven repair cost
Siemens ultraSense Washer Repair
We repair Siemens ultraSense front-load washers still in Canadian homes, including WFXD models.
Washer Not Draining
- Likely cause
- A clogged drain pump filter, a kinked drain hose, or a failed drain pump.
- Try this first
- Put towels and a shallow tray down, then open the small cover at the bottom front and clean the drain pump filter. Check the drain hose isn't kinked.
- When to call Aria
- If it still won't drain, the pump needs testing.
Door Won't Open
- Likely cause
- The cycle hasn't finished, there's still water in the drum, or the door lock has failed.
- Try this first
- Wait a few minutes after the cycle ends. If water is in the drum, clean the drain pump filter first.
- When to call Aria
- If the door stays locked with an empty drum, book a visit.
Won't Spin or Shakes Hard
- Likely cause
- An uneven load, a washer that isn't level, or worn shock absorbers or bearings.
- Try this first
- Spread the load out and restart, and check all four feet sit firmly on the floor.
- When to call Aria
- If it still won't spin or keeps shaking, book a visit.
Musty Smell or Water at the Door
- Likely cause
- Detergent and lint left in the door seal, or a worn seal.
- Try this first
- Wipe the door seal, leave the door open between washes, and use a small amount of HE detergent.
- When to call Aria
- If water still leaks at the door, book a visit.
Good to know
Many ultraSense parts were shared with Bosch washers of the same years. Some are discontinued, so we confirm the part before quoting.
Most washer repairs we do land around $150–$350, depending on the part. You get the exact price before any work starts.
RelatedWasher repair
Siemens ultraSense Dryer Repair
We repair Siemens ultraSense dryers still in Canadian homes, including WTXD models.
Dryer Runs but No Heat
- Likely cause
- A failed heating element, a thermal fuse or thermostat, or a blocked vent.
- Try this first
- Clean the lint filter and check both sides of the double breaker are on.
- When to call Aria
- If it still blows cold air, book a visit. We check the vent too.
Clothes Take Too Long to Dry
- Likely cause
- A clogged lint filter or vent, or an overloaded drum.
- Try this first
- Clean the lint filter at the bottom of the door opening every load, and check the outside vent flap opens.
- When to call Aria
- If drying is still slow with a clear vent, book a visit.
Dryer Won't Start
- Likely cause
- The door isn't fully closed, a tripped breaker, or a failed door switch or control.
- Try this first
- Close the door firmly and check the breaker.
- When to call Aria
- If it still won't start, book a visit.
Squealing or Thumping
- Likely cause
- Worn drum rollers, a belt or an idler pulley.
- Try this first
- Check the drum and lint filter for coins and buttons.
- When to call Aria
- If it squeals or thumps, stop using it and book a visit.
Good to know
Clean the lint filter every load and keep the vent clear. It's the best way to prevent no-heat problems.
Most dryer repairs we do land around $130–$320, depending on the part. You get the exact price before any work starts.
RelatedDryer taking too long · Dryer repair
Siemens Range Fault Codes
Codes vary by model, so treat this as a guide for many models, not every one.
Siemens Range Codes
See range problemsCode still showing after the quick checks? Tell us the code when you book.
Typical Siemens Repairs
Typical Siemens repairs we see, and what usually fixes them. See our recent jobs on Our Work.
Typical Siemens repair
Siemens Dishwasher: Not Draining
Usually a clogged filter or a drain pump that has stopped. We clean the filter and test the pump, and replace it only if it has failed.
Dishwasher repairTypical Siemens repair
Siemens Washer: Won't Drain
Often a clogged drain pump filter. We clear it, test the pump and check the hose.
Washer repairTypical Siemens repair
Siemens Range: Oven Not Heating
Often a failed bake element or temperature sensor. We test each part and replace only what has failed.
Stove repairSiemens Repair Pricing
Current offers on diagnostics and installation. You always get the price before work begins.
Diagnostic regularly $129, now $99
$99
Your technician diagnoses your Siemens and gives you the price before any work begins. Diagnostic regularly $129, now $99, and always waived when Aria does the repair.
Installation From $129
From$129
Replacing an older Siemens? We install a new dishwasher, range, washer or dryer from $129. Pricing depends on the appliance and the existing connections. See installation.
Payment
- Card
- Debit
- Cash
- PayPal
- Apple Pay
* Offers subject to change; price confirmed before work begins.
What Happens at the Visit
Book online or call us. We’ll confirm your appointment, diagnose the problem, and provide the repair price before any work begins.
- Step 01
Book Your Appointment
Call or book online and tell us which appliance needs service and what problem you’re experiencing.
- Step 02
We Diagnose the Problem
A technician inspects the appliance to find the cause of the problem.
- Step 03
You Approve the Repair
We explain the recommended repair and pricing before any work begins.
- Step 04
Repair & Testing
The approved repair is completed and the appliance is tested before we finish.
What to Tell Us When You Book
That helps us bring the right part and finish on the first visit more often.
The code
Exactly as shown, like F + number
The model number
- Dishwashers on the edge of the door
- Ranges on the oven frame behind the door or storage drawer
- Washers & dryers inside the door frame
What you've tried
Like cleaning a filter or power-cycling the unit.
When it happens
At the startMid-cycleAt the end
Repair or Replace Your Siemens?
A simple rule of thumb, then the factors that change it. More on this: repair or replace your appliance.
Repair cost as a share of a comparable new Siemens
Under about halfand the rest in good shape: repair it.
Over about half, or other problems building upIt's a bigger decision. We give you the price so you can weigh it up.
Age & condition
An older appliance with several problems is a different call from a reliable one with a single failure.
Type of failure
Most Siemens repairs we see are a single part: a drain pump, an element, a sensor, a door lock or a thermal fuse.
The big-ticket parts
A main control board or a part that's no longer made.
The price, first
We check parts and give you the price first, so you can decide with real numbers.
These Siemens models are older, so we always confirm the part is available before quoting. If it isn't, we'll tell you straight away. If replacing makes more sense, we also do installation from $129.
What Homeowners Say About Aria
Leave a Google ReviewReal reviews from Vaughan homeowners on Google.
Where We Work
Siemens repair in every part of Vaughan, including Woodbridge, Thornhill, Maple, Kleinburg and Concord. Not in Vaughan? Yes, we may still be able to help. Call 1-888-642-0352 to confirm. See recent jobs on Our Work.
Service areaVaughanVaughan, Ontario
- Woodbridge
- Maple
- Concord
- Kleinburg
- Thornhill
- Vellore Village
- Sonoma Heights
- Patterson
- Elder Mills
- Vaughan Metropolitan Centre
- Carrville
- Islington Woods
Call 1-888-642-0352Mon–Sun 8 AM–10 PM
Book OnlineSiemens is a trademark of its owner. Aria Appliance Repair is independent and not affiliated with Siemens.
Are Siemens appliances still sold in Canada?
Not new. Siemens home appliances were sold in Canada in the 2000s, and many are still running in Vaughan homes. We repair Siemens dishwashers, ranges, washers and dryers still in Canadian homes.
Can you still get parts for Siemens appliances?
Often, yes. Many Siemens models sold here were built alongside Bosch appliances of the same years and share parts. Some parts are discontinued, so we confirm availability before quoting and tell you honestly if a repair doesn't make sense.
What does F and a number mean on my Siemens range?
On Siemens xTronic ranges, an F with a number and beeping is a fault code. Press Off to clear it. If the code stays, book a visit and tell us the number.
Why is my Siemens dishwasher not draining?
Usually the filter at the bottom of the tub is clogged, the drain hose is kinked, or the disposer plug wasn't removed. Rinse the filter and check the hose. If water still sits in the bottom, the drain pump needs testing.
Was my Siemens dishwasher recalled?
In 2009, some Bosch and Siemens dishwashers made between 1999 and 2005 were recalled in Canada, including the Siemens SL34A. We can check your model and serial number during a visit.
Why won't my Siemens ultraSense washer drain?
Most often the drain pump filter behind the small cover at the bottom front is clogged. Put towels and a tray down and clean it. If it still won't drain, the pump needs testing.
Why won't my Siemens washer door open?
The door stays locked until the cycle ends and the drum is empty. Wait a few minutes. If there's water in the drum, clean the drain pump filter first. If the door stays locked with an empty drum, book a visit.
Why is my Siemens dryer not heating?
Common causes are a failed heating element, a thermal fuse or a blocked vent. Clean the lint filter and check the breaker. If it still blows cold air, book a visit.
Is it worth repairing an older Siemens appliance?
Often, yes, if the part is available and the repair costs less than about half of a comparable new appliance. Single parts like a drain pump or element are usually worth it. We price it first and tell you honestly.
How much does Siemens repair cost?
Diagnostic regularly $129, now $99, and always waived when Aria does the repair. After testing and checking parts, you get the exact repair price before any work starts. We accept cards, debit, cash, PayPal and Apple Pay, and completed repairs carry our 1-Year Parts & Labour Warranty.
Can you install a replacement for my Siemens?
Yes. If a repair doesn't make sense, we install a new dishwasher, range, washer or dryer from $129.
How do I book Siemens repair near me?
Book online by choosing your appliance, a day and an arrival window, or call 1-888-642-0352, Mon–Sun 8 AM–10 PM. We serve all of Vaughan, including Woodbridge, Maple, Kleinburg, Concord and Thornhill. If you're outside Vaughan, call to confirm your address. Have your model number ready, because it helps us check parts.
Need Appliance Repair or Installation?
Tell us which appliance you need repaired or installed and we’ll help arrange your appointment.
- Same-Day Service Available
- 1-Year Parts & Labour Warranty
- Mon–Sun 8 AM–10 PM
